Filter
Top Products
13
Switching on the appli-
ance/selecting a pro-
gramme
Select the programme using the programme knob.
3 When you select a programme, you switch the
appliance on at the same time.
– The display lights up and shows the programme
set, the current time and the estimated end of the
cycle.
– Depending on the programme, the washing ma-
chine suggests a temperature and a spin speed.
You can change these suggestions.
Changing the temperature
Press the TEMP. key repeatedly until the desired
temperature is displayed.
Changing Spin Speed/
Selecting Rinse Hold or
Night Cycle
Press the SPIN key repeatedly, until the desired spin
speed or RINSE HOLD or NIGHT CYCLE is
displayed:
• With spin speed “0” the last rinse water is drained
off at the end of the cycle, but the washing is not
spun.
• With RINSE HOLD the washing is left to soak in
the last rinse water. There is no final spin after the
intermediate spin(s). Intermediate spins are pro-
gramme-dependent and cannot be altered.
• With NIGHT CYCLE the washing is left to soak
in the final rinse water. There is no final spin and no
intermediate spin. Because of this the programme
runs very quietly. NIGHT CYCLE is therefore
particularly suitable if you want to wash at night.
COTTONS
12.45
Cycle end at
14.45
60C1800 aaýýýýýaaaaaaaaa
Temp. Spin Options Change Exit
COTTONS
12.45
Cycle end at
14.45
60C 900 aaýýýýýaaaaaaaaa
Temp. Spin Options Change Exit