Zanussi ZWF 1630 W Washer User Manual


 
1 “On/Off” button
Press this button to switch the washing machine on.
The display (8) will show three flashing dashes or a
flashing zero. You will find more detailed explanations
on pages 7-8 (see “DISPLAY”).
Press the On/Off button again to switch the machine
off.
2 MAINS-ON light
This light is connected to the “On/Off” button. It lights
up when you press the button, and goes out when you
press it again.
3 FABRICS button
Press this button repeatedly to select the programme on
the basis of the type of laundry to be washed. The light
relevant to the selected programme will light up. The
washing machine will propose a temperature and
automatically select the maximum spin value provided
for the programme you have chosen. You can change
these values by operating buttons 4 and 5.
Hand wash
When you select this programme, you obtain a
particularly delicate washing, suitable for articles of
clothing whose label indicates that they must be hand-
washed .
4 “Temp.” button
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
washing machine. The relevant light will light up.
Maximum temperatures are 95°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics, wool and
fabrics to be hand-washed (Handwash programme).
6
The Control Panel
123456789101112
1400
900
700
500
Delicates
60°C
50°C
95°C
40°C
Extra
Quick
Prewash
Prewash
Wash
Rinses
Spin
Drain
30°C
Wool
On/Off
Cottons
Synthetics
Outdoor
Sports
Super
Rinse
Delay
40° AA
Skip
Handwash
Start/
Pause
Rinse Hold
Reset
Temp.
Spin
ZWF 1430 S
5 “Spin” button
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the washing machine. The
relevant light will light up.
Maximum speeds are:
• for cotton: 1,600, 1,400 or 1,200 rpm depending on
the model;
• for synthetic fabrics, wool and fabrics to be hand-
washed: 900 rpm;
• for delicate fabrics: 700 rpm.
RINSE HOLD position: when you choose this option,
the machine will not drain the water of the last rinse, so
as not to crease the laundry.
At the end of the cycle, the door is locked, the light of
the “Start/Pause” button goes out, the pilot light of
“Rinse Hold” position remains lit, to indicate that the
water must be drained.
To complete the cycle, choose one of the following
options:
• Drain:
Press “Skip Reset” button once, all the leds are off, the
display will show three flashing dashes, then press
FABRIC button in order to select the desired
programme. If you wish to drain or spin press the “Skip
Reset” button until the led of the desired function
illuminates.
IMPORTANT!
By pressing the “Temp.” and “Spin” buttons
simultaneously, the acoustic signal is deactivated at
the end of the cycle, when selecting the programmes
and in case of an incorrect option selection .
By pressing these 2 buttons again the acoustic signal
is reactivated.