Filter
Top Products
18
At the end of the programme
The machine stops automatically. The
Start/Pause and «wash» lights go off, the
«end» phase light illuminates and on the
display will appear a flashing «
0.00». The
door can be opened (the «Door» light is off).
If the «Rinse hold» or «Night Cycle»
option has been selected, the «End» and
«Door» phase lights illuminate but the door
remains locked to indicate that the water must
be emptied out before opening the door.
The display will show a flashing «
0.00».
To empty out the water please read the steps
on the Rinse Hold option paragraph.
Turn the programme selector dial to «Off» to
switch the machine off.
Remove the laundry from the drum and
carefully check that the drum is empty.
If you do not intend to carry out another wash,
close the water tap. Leave the door open to
prevent the formation of mildew and
unpleasant smells.
Smart 132973840.qxd 11/09/2007 10.43 Pagina 18