Zanussi ZWF 1421S Washer User Manual


 
12
7
. Start the machine
Before starting up the machine check that:
the appliance is plugged in
the water supply tap is turned on
the drain hose is correctly and securely positioned
the door and the detergent dispenser drawer are
closed.
To start the selected programme, press the Start/Pause
button; the corresponding light stops flashing.
The Washing pilot light illuminates.
The machine starts operating.
Start/
Pause
8. At the end
of the programme
The machine stops automatically.
If the RINSE HOLD option has been selected, the
Start/Pause” light goes off, the phase light “End
illuminates and the door is blocked to indicate that the
water must be emptied out before opening the door.
To do this first turn the programme selector dial to “O
and then to drain programme or spin programme
.
Reduce the spin speed if needed, by using the spin
speed selector dial.
Release of the lock is also indicated by the illumination
of the “End” light. The door can then be opened.
Turn the programme selector dial to “O” to switch the
machine off.
Remove the laundry from the drum and carefully check
that the drum is empty.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
132984670.qxd 13/12/2005 10.22 Pagina 12