Zanussi ZWF 1217 W Washer User Manual


 
11
7. Select the spin speed or the
Rinse Hold option
Press the “Spin” button repeatedly, in order to select the
desired spin speed or the Rinse Hold option. The
relevant light will light up.
If you select the Rinse Hold option, the machine will
stop at the end of the programme with the water still in
the tub.
8. Select the desired options
If your laundry is very dirty, it may be advisable to
select the Prewash option.
If you wish the laundry to undergo a soak, select the
Outdoor Sports option.
If your laundry is only slightly soiled, select the Extra
Quick option.
9. Select the Super Rinse or
40
°
AA option
If you wish the laundry to undergo an extra rinse, select
the Super Rinse option.
If your laundry is lightly or normally soiled and it is
necessary to prolong the washing time, select the 40°
AA option.
Extra
Quick
Prewash
Outdoor
Sports
Spin
1200
900
700
500
Rinse Hold
60°C
50°C
95°C
40°C
30°C
Temp.
The relevant light illuminates.
10. Select the DELAY START
Before you start the programme, if you wish the
starting to be delayed, press the DELAY START button
repeatedly, or keep it pressed, to select the desired delay.
The selected delay time value (up to 23 hours) will
appear on the display for 3 seconds, then the duration of
the programme will appear again.
If the Outdoor Sports option has been choosen, the
selected delay will correspond to the soak time. In this
case the display will show after 3 seconds the entire
programme duration (including the soak phase).
11. Start the programme
Press the Start/Pause button. The relevant light will stop
flashing and only the light relevant to the phase that is in
progress will remain lit.
If you have chosen a delayed start, the washing machine
will begin the countdown.
The display will show the duration of the programme or
the selected delay.
12. How to change a programme
during its cycle
Before you make any change, you must pause the
washing machine by pressing the Start/Pause button.
It is possible to change any phase before the programme
carries it out.
Changing the type of fabric or temperature is possible,
obviously, only during the washing phase. When you
make a change in these two parameters, the washing
machine will resume the cycle from the beginning.
Delay
Super
Rinse
40° AA