Filter
Top Products
11
To start the selected programme, press the Start/Pause
button; the corresponding light stops flashing.
The Washing pilot light illuminates.
The machine starts operating.
8. At the end of the programme
The machine stops automatically.
If the Rinse Hold option has been selected, the End
phase light is on and the door is blocked to indicate that
the water must be emptied out before opening the door.
To do this first turn the programme selector dial to “O”
and then to drain programme or spin programme .
The spin programme is performed at the maximum
speed. In order to avoid any creasing in synthetic,
delicate and wool items, the spin reduction option
must be selected.
The door can then now be opened.
Release of the lock is also indicated by the illumination
of the End light and the extinction of the Start/Pause
button light.
Turn the programme selector dial to “O” to switch the
machine off.
Remove the laundry from the drum and carefully check
that the drum is empty.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
132989470.qxd 26/04/2004 10:54 Pagina 11 (Nero/Process Black pellicola)