Filter
Top Products
12
The WASHING pilot light illuminates.
The machine starts operating.
8. At the end
of the programme
The machine stops automatically.
If the Rinse Hold option has been selected, the
phase light END is on and the door is blocked to
indicate that the water must be emptied out before
opening the door.
To do this first turn the programme selector dial to “O”
and then to drain programme or spin programme .
The door can then be opened.
Release of the lock is also indicated by the illumination
of the END light.
Turn the programme selector dial to “O” to switch the
machine off.
Remove the laundry from the drum and carefully check
that the drum is empty.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
Start/
Pause