Filter
Top Products
11
7.Select the desired options
If your laundry is very dirty, it may be advisable to
select the “Prewash” option.
If your laundry needs an extra rinse, select the “Extra
Rinse” option. The relevant light illuminates.
8. Select the “Delay Start”
Before you start the programme, if you wish the
starting to be delayed, press the “Delay Start” button
repeatedly, or keep it pressed, to select the desired delay.
The selected delay time value (up to 23 hours) will
appear on the display for 3 seconds, then the duration of
the programme will appear again.
9. Start the programme
Press the “Start/Pause” button. The relevant light will
stop flashing and only the light relevant to the phase that
is in progress will remain lit.
If you have chosen a delayed start, the washing machine
will begin the countdown.
The display will show the duration of the programme or
the selected delay.
Start/
Pause
Delay
Start
Prewash
Extra
Rinse
10.How to change an option or a
programme during its cycle
Before you make any change, you must pause the
machine by pressing the “Start/Pause” button.
It is possible to change any option before the
programme carries it out.
Changing a running programme is possible only by
cancelling it and selecting a new programme. Turn the
programme selector dial to “Off” and then to the
selected programme. Start it by depressing the
“Start/Pause” button.
The machine will resume the cycle from the beginning
and the washing water in the tub will not empty out.
11.How to interrupt a
programme
Depress the “Star/Pause” button to interrupt a
programme which is running, the corresponding light
starts to flash.
12.How to cancel a programme
during its cycle
Turn the selector dial to “Off” to cancel a programme
which is running. Now you can select a new
programme.
13.
How to open the door during
the cycle of a programme
First set the machine to PAUSE by pressing the
“Start/Pause” button.
If the door does not open, this means that the machine is
already heating, that the water level is above the bottom
edge of the door or that the drum is turning.
If you cannot open the door but you need to open it you
have to switch the machine off by turning the
programme selector dial to “Off” position.
After about 3 minutes the door can be opened.
Pay attention to the level and temperature of the
water in the machine !
After closing the door, turn the programme selector dial
to the programme previously selected and start it by
depressing the “Start/Pause” button.