Zanussi ZWD 1261 W Washer/Dryer User Manual


 
9
Close the drawer gently.
4. Select the spin speed or option
NO SPIN or RINSE HOLD
Turn the dial to the required position.
5. Select the programme
Turn the programme selector dial clockwise to the
programme K.
K
M0017a
4
5
0
5
5
0
6
5
0
7
5
0
8
5
0
1
0
0
0
1
2
0
0
s
p
i
n
n
o
h
o
l
d
r
i
n
s
e
C0065
6. Start the machine
Before starting up the machine check that:
the appliance is plugged in
the water supply taps are turned on
the drain hose is correctly and securely positioned
the door and the detergent dispenser drawer are
closed.
Depress the “On-Off” button: the mains-on light will
illuminate and the machine starts operating.
7. At the end of the programme
The machine stops automatically.
If you have selected the “R
INSE HOLD” option, the
machine will stop with the water of the last rinse left in
the tub, to prevent the fabric from creasing. To drain
only, select position “
NO SPIN” or the drain programme
S”.
To drain and spin, select programme “M” or turn the
spin speed selector dial to the desired speed position: the
machine will spin at the selected speed.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the “On-Off
button again. The mains-on light goes out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
T0001S
On-Off
132986760.qxd 31/03/2005 09:41 Pagina 9 (Nero/Process Black pellicola)