Zanussi ZT 1082 Washer User Manual


 
Washing 2 kg of synthetic
fabrics at 50°C
Suppose you have 2 kg of synthetic fabrics to
wash. They are rather delicate fabrics and should
not be washed at a high temperature.
1. Load the laundry
Open the door by pulling the catch outward.
Load the items one at a time and close the door.
2. Measure out the detergent
Pull out the detergent dispenser drawer from the
control panel. Measure out the amount of detergent
required and pour into the main wash
compartment.
3. Add the fabric softener if required
Pour the fabric softener, if required, into the
compartment marked .
Do not exceed the MAX level and then close the
drawer gently.
P0005
P0006
4. Select the required wash
programme
Turn the programme selector dial clockwise to the
required programme.
5. Start the machine
Before starting up the machine check that:
n
the appliance is plugged in
n
the water supply taps are turned on
n
the drain hose is correctly and securely
positioned
n
the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF button: the mains-on light
illuminates and the machine starts operating.
6. At the end of the programme
The machine stops automatically.
The machine stops after the last rinse with the
water left in the wash tub, to prevent the fabric from
creasing. To drain the water select programme
N or P.
The door is controlled by a safety device which
releases 2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.
When the programme has finished you are advised
to unplug the appliance and turn off the water taps.
P0726
ON/OFF
P0673
G
18