Filter
Top Products
7
Operating Sequence
Before the first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 4.5 KG OF WHITE COTTON AT 95°C
Suppose you have 4.5 kg of normally soiled laundry to
wash. It is white cotton and is suitable for high
temperature washing.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment .
If you wish to carry out the prewash, pour detergent into
the compartment marked .
P0994
P0004
3. Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
“MAX” mark in the drawer).
Close the drawer gently.
4. Select the required option
Depress RINSE HOLD PLUS or QUICK WASH button,
if your laundry is lightly soiled.
5. Select the required programme
Push the programme selector dial to pop it out and turn
it clockwise to the programme B or A (if you wish to
perform a prewash).
P0429A
B
HALF
LOAD
ON-OFF
QUICK
WASH
RINSE
HOLD PLUS
P0995
132996170.qxd.qxd 7/19/01 2:41 AM Pagina 7 (Nero/Process Black pellicola)