Zanussi ZT 1012 Washer User Manual


 
8
6. Select the required programme
Turn the dial clockwise to the programme B or A (if
you wish to perform a prewash).
7. Start the machine
Before starting up the machine check that:
the appliance is plugged in
the water supply tap is turned on
the drain hose is correctly and securely positioned
the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF button : the mains-on light will
illuminate and the machine starts operating.
P0471S
ON-OFF
P0429S
B
8. At the end of the programme
The machine stops automatically.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.
Remove the laundry from the drum and carefully check
that the drum is empty so as to avoid any forgotten
items being damaged in a subsequent wash (e.g.
shrinking) or their colour running into a load of whites.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.