Filter
Top Products
10
Operating Sequence
Before the first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment .
If you have selected the PREWASH option or the
SOAK programme, pour detergent into the
compartment marked .
3. Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
“MAX” mark in the drawer).
Close the drawer gently.
P0005
P0006
P0004
4. Switch the machine on
To switch the machine on, press the ON/OFF button:
the mains-on light comes on.
5. Select the required programme
Turn the programme selector dial to the desired
position: the lights corresponding to the different phases
making up the selected programme light on.
6. Select the SPIN speed or
RINSE
HOLD
option
Depress the spin speed button to choose the required
speed or RINSE HOLD option: the corresponding light
comes on.
1200
900
700
500
SPIN
RINSE
HOLD
WASH
CLOGGED
FILTER
DOOR
PREWASH
SPIN
END
RINSES
DRAIN
95º
E
60º
40º
30º
60º
40º
30º
40º
30º
40º
O
30º
COTTON
DELICATES
SYNTHETICS
WOOL
60º
SPECIAL
PROGRAMMES
40º
E
40º
E
ON / OFF
132996160_ZJ1217.qxd 21/08/2003 16:58 Pagina 10 (Nero/Process Black pellicola)