Filter
Top Products
12
6. Select the temperature
Press the TEMPERATURE button if you wish to select
a temperature value different from the one proposed by
the washing machine.
The relevant light will light up.
7. Select the spin speed or the
NIGHT WASH option
Press the SPIN SPEED button repeatedly, in order to
select the desired spin speed or the NIGHT WASH
option. The relevant light will light up.
If you select the NIGHT WASH option, the machine
will stop at the end of the programme with the water still
in the tub.
8. Select the desired options
If your laundry is very dirty, it may be advisable to
select the PREWASH option.
If your laundry is lightly or normally soiled and it is
necessary to prolong the washing time, select the AA40°
option.
If your laundry is only slightly soiled, select the QUICK
option.
The relevant light illuminates.
O
P
T
I
O
N
S
Q
U
IC
K
P
R
EW
A
S
H
AA40°
S
P
I
N
S
P
E
E
D
1600
1200
900
700
NIGHT
WASH
60°C
50°C
90°C
40°C
T
E
M
P
E
R
A
T
U
R
E
30°C
9. Select the DELAY START
Before you start the programme, if you wish the
starting to be delayed, press the DELAY START button
repeatedly, or keep it pressed, to select the desired delay.
The selected delay time value (up to 24 hours) will
appear on the display for 3 seconds, then the duration of
the programme will appear again.
10. Start the programme
Press the START/PAUSE button. The relevant light will
stop flashing, the DOOR LOCKED light will light up,
and only the light relevant to the phase that is in
progress will remain lit.
If you have chosen a delayed start, the washing machine
will begin the countdown.
The display will show the duration of the programme or
the selected delay.
11. How to change a programme
during its cycle
Before you make any change, you must pause the
machine by pressing the START/PAUSE button.
It is possible to change any phase before the programme
carries it out.
Changing the type of fabric or temperature is possible,
obviously, only during the washing phase. When you
make a change in these two parameters, the machine
will resume the cycle from the beginning.
S
T
A
R
T
/
P
A
U
S
E
DELAY
START
132992320.qxd 4/30/03 10:02 AM Pagina 12 (Nero/Process Black pellicola)