Filter
Top Products
11
7
. Start the programme
Before starting up the machine check that:
●
the appliance is plugged in
●
the water supply tap is turned on
●
the drain hose is correctly and securely positioned
●
the door and the detergent dispenser drawer are
closed.
To start the selected programme, press the
“Start / Pause” button; the corresponding light stops
flashing.
Only the “washing” pilot light stays on.
The machine starts operating.
8. At the end
of the programme
The machine stops automatically.
If the (rinse hold) option has been selected, the
phase light “End” is on to indicate that the water must
be emptied out before opening the door.
To do this first turn the programme selector dial to “O”
and then to drain programme or spin programme .
In this case reduce the spin speed by means of the
relevant button in order that the fabrics to be spun at a
suitable speed.
Release of the lock is indicated by the illumination of
the “End” light.
Turn the programme selector dial to “O” to switch the
machine off.
Remove the laundry from the drum and carefully check
that the drum is empty.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.