Filter
Top Products
11
ENGLISH
Drying sequence
Before starting up for the first time it is advisable
lo load a few moist cloths into the dryer and to let
it run for about 20 minutes. This ensures that no
dust and dirt is left in the drum.
1. Load the laundry
Open the door by pulling the catch forwards.
Load the items one at a time, shaking them out
loosely and close the door.
Please check the laundry does not get caught
between the door and filter.
2. Select the required option
Depress Cool Tumbling or Low Temp. Buttton, if
desired.
3. Select the drying time
Turn the selector dial clockwise to the desired
time, in the high or low temperature section,
depending on the laundry: the mains-on light
illuminates and the machine starts operating.
4. When drying is completed
The machine stops automatically, the mains-on
light goes out.
If the laundry is still too damp, select a further
brief drying time, bearing in mind that during the
last 8 minutes the dryer carries out the cooling
and anti-crease treatment phase.
Clean the filter after every drying programme.
A clean filter ensures correct functioning of
the appliance.
P0305
P0550
60
i