Zanussi TD 4212 W Clothes Dryer User Manual


 
6
1 2 34 5
START
ON-OFF
DUAL TEMPERATURE
IMPORTANT: PLEASE READ THE INSTRUCTION BOOK BEFORE USING THIS APPLIANCE
COTTON
SYNTHETICS
STORE DRY
Spun at rpm
kg 5
kg 2.5
IRON DRY
800 / 900 1000 / 1200
80' - 100' 75' - 95'
55' - 70' 50' - 65'
Spun at rpm
650
50' - 60'
30' - 35'
kg 2.5
kg 1
800 / 900 1000 / 1200
70' - 90' 65' - 85'
35' - 50' 30' - 45'
STORE DRY
TD
4
2
12
W
IMPORTANT: PLEASE READ THE INSTRUCTION BOOK BEFORE USING THIS APPLIANCE
LOW
TEMP.
LIGHT
ON-OFF
DRYING TIMEDRYING TIME
XTRACAPACITY
AUTOREVERSE
The Control Panel
1 Programme Chart
This will help you to select the correct time for
drying.
2 Low Temperature
Button
Press this button to reduce the temperature when
drying particularly delicate cotton or linen items.
In this case you should select a longer drying time.
On the programmes for synthetics the temperature is
automatically reduced.
Therefore it is not necessary to depress this button.
3 Start Button
After selecting the drying time press this button to
start the programme.
If the door is opened during drying, this button has to
be depressed again after closing the door to allow the
programme to continue.
4 Mains-On (ON-OFF) Light
This lights up when the machine starts operating and
goes out by turning the selector dial to “0” and when
you open the door.
55
Drying Time Selector
Dial/ON-OFF Switch
The selector dial incorporates two drying cycles, one
of up to 150 minutes at a high temperature for cotton
and linen, and one of up to 100 minutes at a low
temperature for synthetic fabrics.
To set the machine to the selected time, turn the dial
clockwise until the time you want coincides exactly
with the pointer.
NEVER attempt to turn the dial in an anticlockwise
direction.
When selecting the drying time, you should
remember that it includes a 10 minute cooling phase
(position on the dial).
This phase should not be shortened, stopped or
avoided, as this could cause skin burns or damages to
the laundry.
Additional drying
If at the end of the programme the laundry is still too
damp, set the dial for a further period of drying
(remembering to take into account the cooling
period).
125994620.qxd 10/05/01 10.42 Pagina 6 (Nero/Process Black pellicola)