Filter
Top Products
6
11 “Drying” Light
This light indicates that the machine is performing
the drying phase.
12 “Cooling” Light
This light indicates that the appliance is in the
cooling phase. At the end of drying, there is a 10
minute cooling phase to cool the laundry.
If light or is flashing, this means that the
Start Button needs to be pressed again for the
programme to resume.
1
3 “End of Programme” Light
This light flashes at the end of the cooling phase and
during the anti-creasing phase together with light
.
14 “Full Tank” Light
This light flashes when the water reservoir is full.
The reservoir can also be emptied during a
programme.
In this case, after having fitted back in place, the start
button must be pressed again for the programme
to resume.
15 Programme Selector Dial
It allows you to select electronically controlled or
time controlled drying.
Turn the dial to the required programme or time.
To cancel a programme which is running, turn the
programme selector dial to “0” .
At the end of drying, turn the selector dial to “0”
before removing the laundry.
Electronic Controlled
Programmes
These operate by means of dampness sensors.
All you have to do is to set the selector dial for the
programme required and the laundry will be dried to
the selected degree of dryness.
Timed Programmes
They can be used to finish off drying if necessary.
Select the 60 minute programme for cottons or the 30
minute programme for synthetics.
125994650.qxd 09/05/01 16.02 Pagina 6 (Nero/Process Black pellicola)