Filter
Top Products
10
Operating sequence
Before using your tumble dryer for the first time, we
recommend to place a few damp cloths inside the
appliance and dry for about 20 minutes.
There may be dust inside a brand new tumble dryer.
1. Connect the appliance.
2. Open the door by pressing the relevant button.
3. Load the items one at a time, shaking them out
loosely.
4. Close the door. Please check the laundry does
not get caught between the door and filter.
5. Select the desired drying time (in high or low
temperature section, depending on the laundry).
6. In case, press button .
7. Press button : the programme starts.
When the position on the dial is reached, the
heating is automatically cut off and the laundry is
cooled.
After around 10 minutes, the programme is over.
Important: It is not advisable to open the door during
operation to check the degree of dryness. As the
laundry is warm, when touched it gives the
impression of still being damp, even if it is dry. Open
the door after the programme has finished.
If the programme has to be interrupted, it is
advisable to perform the cooling phase to prevent
the heat from building up inside the machine.
After drying
■
Switch off the appliance.
■
Clean the filter and empty water container (see
page 12).
125994260•TCS603LT•gb 12-12-2000 8:38 Pagina 10