Zanussi T 613 Washer User Manual


 
26
USE OF YOUR APPLIANCE
The control panel
1 ON/OFF pushbutton " "
Press the on/off pushbutton, the programme starts
: the control lamp lights on.
2 Control lamp
The control lamp lights on when the appliance is
working (on/off pushbutton " " pressed). It lights
off when the cycle is finished (programme selector
on a stop position "I").
3 Half load pushbutton " "
This pushbutton allows to wash small quantity of
linen not much soiled (2,5 kg) only on the cotton
programmes.
4 Rinse hold pushbutton " "
Press this button to leave the water in the drum
after the wash cycle is completed. This works on
all the washing programmes. The clothes are left
suspended in water after the final rinse to prevent
the formation of creases.
Never turn the programme selector when the appliance is working.
12634 5
5 Programme selector
It enables to select the most adapted programme
to the nature and degrees of soil of your laundry.
Turn the programme selector clockwise to select
the chosen programme.
The programme selector indicates each pro-
gramme phase as it takes place.
At the end of the programme, the appliance stops
automatically on a stop position "I" for all the
programmes or on a rinse hold position " " if the
rinse hold pushbutton is selected.
Never turn the programme selector anticlockwise.
6 Temperature selector
It enables to choose the most adapted temperature
between cold (
) and 90°C.
Choose the temperature which corresponds to the
chosen programme, with the help of the indica-
tions or the programme table, according to the
fibers and the fastness of the colours.