Filter
Top Products
9
Selecting a special programme:
A wash programme must be selected in the normal way.
(START button not pressed)
The SKIP button is then used to cancel or advance the
programme to the required phase.
The SKIP button can only operate when the programme
is in pause.
A normal wash cycle consists of the following phases,
Wash - Rinses - Spin and is confirmed by the
illumination of the corresponding LED,s.
To select rinses & spin, the programme must be paused,
now press the SKIP button once, the wash LED goes out.
To select spin only, the programme must be paused,
now press the SKIP button twice.
The wash & rinses LED,s go out.
PREWASH
WASH
SPIN
RINSES
DRAIN
PREWASH
WASH
SPIN
RINSES
DRAIN
PREWASH
WASH
SPIN
RINSES
DRAIN
S
T
A
R
T
/
P
A
U
S
E
To select Drain the programme must be paused, now
press the SKIP button three times, the wash - rinses -
spin LED,s go out.
11 DELAY button
This button makes it possible to delay the starting of the
programme by up to 24 hours. The delay you have
selected is shown on the display for about 3 seconds;
afterwards, the duration of the programme reappears.
If OUTDOOR SPORTS option has been chosen the
selected delay will correspond to the soak time.
You must select this option after you have set the
programme and before you press the START/PAUSE
button.
The time value shown on the display will decrease by
one unit every hour.
You can change the delay time at any moment, before
you press the START/PAUSE button.
If you have already pressed the START/PAUSE button,
and you wish to change or cancel the delay time,
proceed as follows:
Delay Start only (without the OUTDOOR SPORTS
option):
• set the washing machine to PAUSE by pressing the
START/PAUSE button;
• press the DELAY button until the display shows the
desired delay time or
• press the DELAY button once, to erase the delay time.
The display will indicate “0h”.
• press the START/PAUSE button again.
Delay Start with the OUTDOOR SPORT option:
• set the washing machine to PAUSE by pressing the
START/PAUSE button;
• press the SKIP/RESET button once or repeatedly until
three dashes appear on the display in order to clear the
memory;
• select the programme again and eventually a new delay
time;
• press the START/PAUSE button again.
PREWASH
WASH
SPIN
RINSES
DRAIN
132992340.qxd 4/30/03 11:20 AM Pagina 9 (Nero/Process Black pellicola)