Filter
Top Products
6
1 Detergent dispenser drawer
Programme Option buttons
Depending on the programme, different functions can
be combined. These must be selected after choosing the
desired programme and before depressing the
START/PAUSE button.
When these buttons are pressed, the corresponding pilot
lights come on. When they are pressed again, the pilot
lights go out.
If an incorrect option is selected, the corresponding
pilot light flashes for about 2 seconds.
2 “OPTIONS” button
Press this button to select the following options:
●
Prewash
Select this option if you wish your laundry to be
prewashed at 30°C before the main wash (not
available for wool).
The prewash ends with a short spin in programmes
for cotton and synthetic fabrics, whereas in the
programme for delicate fabrics the water is only
drained.
●
Quick wash
This button allows you to select the QUICK WASH
function, for laundry that is only slightly soiled
(cannot be selected with the wool or E
programme).
The washing time will be reduced according to the
type of fabric and the selected temperature.
Max. load for cotton 4 kg.
3 EASY IRON button
Selecting this button the laundry is gently washed and
spun to avoid any creasing. In this way ironing is easier.
The Control Panel
XTRACAPACITY
6
FX 1165 W
4 H
2 H
PROGRAMMES
SPIN
EASY
IRON
DELAY
START
12 H
8 H
WASHING
END
HALF
LOAD
START
PAUSE
PRE-
WASH
QUICK
AQUACYCLE 1100
1 234567 89
Furthermore the machine will perform 6 rinses instead
of 3 for cotton and 4 rinses instead of 3 for synthetics.
This function can be used for cotton and synthetic
fabrics.
4 HALF LOAD button
Select this button to reduce water consumption on the
rinse cycle when washing a smaller load of cottons or
linens (maximum load size = 3 kg).
The machine will perform 2 rinses instead of 3.
5 Start Pause button
After having selected the required programme, press
this button to start the machine; the corresponding pilot
light stops flashing.
To interrupt a programme which is running, depress the
Start/Pause button: the corresponding pilot light starts to
flash.
To restart the programme from the point at which it was
interrupted, press the START/PAUSE button again.
6 DELAY START button
This button makes it possible to delay the starting of the
washing programme by 12, 8, 4 and 2 hours. The delay
you have selected is indicated by the coming on of the
corresponding light.
You must select this option after you have set the
programme and before you press the START
PAUSE button.
You can cancel the delay time at any moment, before
you press the START/PAUSE button.
If you have already pressed the START/PAUSE button,
and you wish to cancel the delay time, proceed as
follows:
• set the washing machine to PAUSE by pressing the
132992390.qxd 4/29/03 2:32 PM Pagina 6