Zanussi FLS 1084 Washer User Manual


 
10
5. Select the required programme
Turn the programme selector dial clockwise to the
required programme.
6. Start the machine
Before starting up the machine check that:
the appliance is plugged in
the water supply taps are turned on
the drain hose is correctly and securely positioned
the door and the detergent dispenser drawer are
closed.
Pull the programme selector dial outwards: the mains-on
light will illuminate and the machine starts operating.
7. At the end of the programme
The machine stops automatically and the mains-on light
goes out.
If you have depressed the rinse hold button , the
machine will stop with the water left in the tub, to
prevent the fabric from creasing. To drain the water
release the same button (the clothes will be gently spun)
or select programme “R”.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the programme
selector dial.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
P0215S
K
P0216S
K