Filter
Top Products
1 Programme guide
2 On/Off button
By depressing this button the machine starts operating.
When depressed again, the machine stops.
3 Mains-on light
This light illuminates when the machine starts working
and goes out when the ON/OFF button is released.
4 Spin Reduction button
By depressing this button the spin speed is reduced as
follows:
● cottons and linens: from 1000 rpm to 650 rpm for
model FLA 1001 W and from 1100 or 1200 rpm
according to the model to 650 rpm (FLA 1101 W -
FLA 1201 W).
● synthetics and delicates: from 650 rpm to 450 rpm.
● wool: from 850 rpm to 650 rpm.
6
The Control Panel
FLA 1001W
Z
ANUSSI
Q
UALITY
ON-OFF
RINSE
HOLD
HALF
LOAD
SPIN
REDUCTION
A
SHORT SPIN
WHITES + PREWASH
WHITES
FAST COLOUREDS
NON FAST COLOUREDS
HAND RINSES
LONG SPIN
D
C
B
F
G
MIXED FABRICS
WOOL CARE
DELICATES
FRESHEN UP
WORN ONCE
H
L
M
J
N
K
DRAIN
P
AQUACYCLE 1000
1 23 456 7
5 Rinse Hold button
Press this button to make the machine stop with water in
the drum after the cotton, synthetic or delicate wash
cycles.
This prevents any creasing which may occur if the
clothes are left damp in the drum. When it is convenient
for you to empty the machine, simply press this button
again so that the machine can proceed to drain and spin,
or turn the dial to the drain programme “P”.
If this button is not activated, the washing programmes
will end with a spin.
6 HALF LOAD button
Select this button to reduce water consumption on the
rinse cycle when washing a smaller load of cottons or
linens (maximum load size = 2.5 kg).
7 Programme selector dial
Turn the dial clockwise to select the required wash
programme.
Before setting the dial to any position the machine must
be switched off by depressing the ON/OFF button again.
132998431.qxd 11/29/01 9:00 AM Pagina 6 (Nero/Process Black pellicola)