Zanussi FL 1014 V1 Washer User Manual


 
35
EN
G
LI
S
H
6. Select the programme and start it
Turn the programme selector dial clockwise to
the required wash programme and press the
start/stop button : the operating pilot light
comes on and the machine starts to operate.
7. At the end of the programme
The machine stops automatically, the operating
pilot light goes out.
If you have selected a gentle programme with the
anticrease option
,
drain the water before
opening the door.
It is normal to have to wait for about 2 minutes
before being able to open the door to allow the
safety lock to release.
Press the start/stop button again.
Remove the laundry.
Turn the drum by hand to make sure it is
completely empty, so as to avoid any forgotten
items being damaged in a subsequent wash (e.g.
shrinking) or their colour running into a load of
whites.
Release any buttons which have been pressed.
Turn the water tap off and unplug the machine.
Leave the door ajar to air the machine.
P0218
B
P0412