Filter
Top Products
1 ON/OFF button
Press this button to switch the washing machine on.
Press the ON/OFF button again to switch the machine
off.
2 MAINS-ON light
This light is connected to the ON/OFF button. It lights
up when you press the button, and goes out when you
press it again.
3 FABRICS button
Press this button repeatedly to select the programme on
the basis of the type of laundry to be washed. The light
relevant to the selected programme will light up. The
washing machine will propose a temperature and
automatically select the maximum spin value provided
for the programme you have chosen. You can change
these values by operating buttons 4 and 5.
4 TEMPERATURE button
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
washing machine.The relevant light will light up.
Maximum temperatures are 90°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics and wool.
IMPORTANT!
By pressing the TEMPERATURE and SPIN
SPEED buttons simultaneously, the acoustic signal
is deactivated at the end of the cycle, when selecting
the programmes and in case of an incorrect option
selection .
By pressing these 2 buttons again the acoustic signal
is reactivated.
6
The Control Panel
F
A
B
R
I
C
S
S
P
I
N
S
P
E
E
D
T
E
M
P
E
R
A
T
U
R
E
FJ 1254 W
SYNTHETICS
DELICATES
COTTONS
WOOL
60°C
50°C
90°C
40°C
1200
900
700
500
RINSE
HOLD
S
T
A
R
T
/
P
A
U
S
E
R
E
S
E
T
SKIP
O
N
/
O
F
F
1 23 456 789
30°C
O
P
T
I
O
N
S
QUICK
PREWASH
AA40°
5 SPIN SPEED button
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the washing machine. The
relevant light will light up.
Maximum speeds are:
• for cotton: 1400, 1300, 1200 or 1000 rpm depending
on the model;
• for synthetic fabrics and wool: 900 rpm;
• for delicate fabrics: 700 rpm.
RINSE HOLD position : when you choose this
option, the machine will not drain the water of the last
rinse, so as not to wrinkle the laundry.
At the end of the cycle, the START/PAUSE button light
will flash, to indicate that the water must be drained.
To complete the cycle, choose one of the following
options:
• Draining and spin:
- Press the START/PAUSE button. The machine
will drain the water, then spin the laundry at the
maximum speed provided for the selected
programme.
- Select spin speed by means of button 5, and press
the START/PAUSE button.
• Drain only
- Press the SKIP/RESET button once, so as to cause
the DRAIN light to light up, then press the
START/PAUSE button.
Important! If you accidentally press the SKIP/RESET
button more than once the programme is cancelled.,
To drain the water, select any washing programme
by means of the FABRIC button, then press
SKIP/RESET three times in order to select the
DRAIN position (only the DRAIN light will remain
lit).
132994360.qxd 6/6/02 4:18 PM Pagina 6 (Nero/Process Black pellicola)