Filter
Top Products
9
Operating Sequence
Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment of
the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 60°C, without any laundry in
the machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 5 KG OF WHITE COTTON AT 95°C
Suppose you have 5 kg of heavy soiled laundry to wash.
It is white cotton and is suitable for high temperature
washing.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it
into the main wash compartment and into the
compartment marked .
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
“MAX” mark in the drawer). Close the drawer gently.
P0877
P0876
P0004
3. Select the required programme
Turn the programme selector dial to the programme.
The light START/PAUSE starts to flash
.
4. Select the spin reduction
or option, if desired
The light corresponding to the depressed button
illuminates.
5. Select the required option
Depress QUICK WASH button, if required. The
corresponding light illuminates.
6. Select the DELAY START
Before you start the programme, if you wish the
starting to be delayed, press the DELAY START button
repeatedly, to select the desired delay. The relevant light
illuminates.
QUICK
WASH
HALF
LOAD
E
132993040.qxd 7/25/02 2:51 PM Pagina 9 (Nero/Process Black pellicola)