Filter
Top Products
8
Duration of the selected programme
After selecting a programme, the duration is displayed
in hours and minutes ( for example 2.05).
The duration is calculated automatically on the basis of
the maximum recommended load for each type of
fabric.
After the programme has started, the time remaining is
updated every minute.
Delayed start
The selected delay (23 hours max) set by means of the
relevant button appears on the display for 3 seconds,
then the duration of the previously selected programme
is displayed.
The countdown is updated every hour and, when remain
the last 2 hours, each 30 min.
IInnccoorrrreecctt ooppttiioonn sseelleeccttiioonn
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed for
2 seconds.
DELAY
START
2.05
Alarm codes
In the event of operating problems, some alarm codes
can be displayed, for example E20 (see paragraph
“Something not working”).
End of programme
When the programme has finished a flashing zero is
displayed. The door can be opened when the
(D
OOR) pilot light has gone out and if the (RINSE
HOLD
) option has not been selected.
13 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, the (D
OOR) pilot
light and only the running phase light illuminate and
stay on.
When the programme has finished, the (
END) pilot
light comes on and the the (D
OOR)
pilot light goes off.
WASH
CLOGGED
FILTER
DOOR
PREWASH
SPIN
END
RINSES
DRAIN
0
E20
132985450.qxd 18/07/2005 17:47 Pagina 8