Filter
Top Products
9
When selecting a drying programme, if you turn the
programme selector dial to the “Dry” position or
depress the drying time button in Automatic Washing &
Drying cycle, the “Drying” pilot light illuminates.
When the “Drying” light is on, the washer -dryer is
performing the drying cycle.
Rinses
With this programme it is possible to rinse and spin the
garments which have been washed by hand. The
machine performs 3 rinses, followed by a final long spin
at the maximum speed.
Important!
The spin speed will automatically assume the setting for
cotton items. If required, reduce the speed to the desired
level by depressing the “Spin” button.
Softeners
Hand washed garments can be be starched or softened
with this programme.
The machine performs 1 rinse, followed by a final long
spin at the maximum speed, which can be reduced by
depressing the “Spin” button.
The final spin is foreseen only for cotton items as in
the spin programme.
Drain
For emptying out the water of the programme
“Soak 30” or at the end of a programme with the
“Rinse Hold” option.
Turn first the programme selector dial to “O” Off, then
select the “Drain” programme and depress the
“Start/Pause” button.
Spin
Separate long spin at the max speed for hand washed
garments. It has to be used for cotton items. You can
reduce the speed by means of “Spin” button to adapt it
to the fabrics to be spun.
Mini 30°
This is a complete programme that can be combined
with the following options: Spin speed reduction/
“Rinse hold”.
To be used for laundry which is lightly soiled or which
needs freshening up.
Max. load 2.5 kg.
Washing temperature 30 C.
Programme duration 30 minutes.
Final spin speed 700 rpm.
“O” Off = Reset programme /switching the machine off
To reset a programme or switching the machine of, turn
the selector dial to “O” Off.
Now a new programme can be selected.
Programme Information
Soak 30°
This is a special programme for heavily soiled laundry.
The machine performs a soak of about 20 minutes at
30°C. At the end of the soak time the machine will stop
automatically with water left in the tub. The display
will show a flashing zero.
Pour the detergent for the soak programme into the
compartment marked
.
This programme cannot be used for very delicate
fabrics or Wool.
Before starting a new washing phase, it is necessary to
empty out the water by:
• Draining only: turn the programme selector dial to
Drain” programme”. (Depress the “Start/Pause”
button).
• Draining and spin: turn the programme selector dial
to programme “Spin”, reduce the spin speed by
means of the “Spin” button, and then depress
“Start/Pause” button.
Important!
• At the end of the soak (after having emptied out the
water) you can select the washing programme. First
turn the programme selector dial to “Off”, then select
the programme and depress the “Start/Pause” button.
132981630revised.23.01.07.qxd 23/01/2007 9.28 Pagina 9