Filter
Top Products
i
Important Safety
_nstructiOn$ (continued)
Avoid fire hazard or
electrical shock. Do not use an
adaptor plug or extension cord or
remove grounding prong from
electrical power cord. Failure to
follow this warning can cause serious
injury, fire or death.
Grounding type
wall receptacle
Power supply
cord wth 3 larong
grounding pug
CORRECT
Use this way ONLY
Do not use or mix
liquid chlorine bleach with other
household chemicals such as toilet
cleaners, rust removers, acid or
products containing ammonia. These
mixtures can produce dangerous
fumes which can cause serious injury
or death.
Prevent Injury
To prevent shock hazard and assure stability during operation, the
washer must be installed and electrically grounded bya qualified service person in
accordance with local codes. Installation instructions are packed in the washer for
installer's reference. Referto INSTALLATIONINSTRUCTIONSfor detailed grounding
procedures. If thewasher ismoved to a new location, have itchecked and reinstalled
by a qualified service person.
If the power cord is damaged, it should be replaced by the
manufacturer, service technician or a qualified person to prevent any risk.
To prevent personal injury or damage to the washer, the electrical
power cord of the washer must be plugged into a properly grounded and polarized
3-prong outlet. The third grounding prong must never be removed. Never
ground the washer to a gas pipe. Do not use an extension cord or an adaptor
plug.
Follow package directions when using laundry products. Incorrect
usage can produce poisonous gas--resulting in serious injury or death.
Donor combine laundry products for usein 1load unlessspecified on the label.
Do not mix chlorine bleach with ammonia or acids such asvinegar.
To prevent serious personal injury and damage to the washer:
All repairs and servicing must be performed by an authorized servicer
unless specifically recommended in this Owner's Guide. Use only authorized
factory parts.
Do nottamper with controls.
Do not install or store the washer where it will be exposed to the weather.
_AL WAYS disconnect the washer from the electrical supply before
attempting any service or cleaning. Failure to do socan result in electrical shock or
injury.
To prevent injury, do not reach into the washer while parts are
moving. Before loading, unloading or adding items, push in the cycleselector knob
and allow the tub to coast to a complete stop before reaching inside.
Failureto comply with these warnings could result inserious personal injuries.
_1_Thiswasher isequipped with anelectrical overload protector. Tile motor will stop
if it becomes overheated. Tile washer will automatically restart after a cool down
period of up to 30 minutes, if the washer hasnot been manually turned off during
this time.
SAVE THESE INSTRUCTIONS
Note: The instructions appearing in this
Owner's Guide are not meant to cover
every possible condition and situation
that may occur. Common sense and
caution must be practiced when
installing, operating and maintaining
any appliance.