Filter
Top Products
Doc No. WOI/washer/2001/009 Page No 9
Modified on date 03/08/2001 Subject to modification
5. SPIN SHOWER
This is again a tow position knob viz. WASH TUB and SPIN SHOWER. When set at WASH
TUB position, it allows the water to be filled in the wash tub. When set at SPIN SHOWER
position, the water gets filled in the spin tub.
Spin shower option is generally used to aid the soap removal form the clothes. During this
process, the clothes are loaded in the spin tub and the knob is set at SPIN SHOWER mode.
Water is then filled into the machine. This water gets sprayed over the clothes in spintub.
After 2 minutes of spraying, the water supply needs to be cut off and then spin timer is set
ON for few minutes of spinning. This removes the suds from the clothes effectively.
6. PROGRAM SELECTTOR (applicable only for SUPER NEW model)
In super new models, the spin timer is replacing this three way switch. The three positions
available are WASH, SPIN and WASH & SPIN. This switch will work in conjunction with
the wash timer (Known as PROGRAM TIMER in SUPER NEW model) as detailed below:
AT WASH POSITION : The wash motor will be ON for the duration set at
PROGRAM TIMER
AT SPIN POSITON : The spin motor will be ON for the duration set at
PROGRAM TIMER
AT WASH & SPIN : BOTH THE WASH AND SPIN MOTORS will be ON for
the duration set at PROGRAM TIMER