Filter
Top Products
9
Add a measured amount of HE
detergent into detergent dispenser.
IMPORTANT: Use only High Efciency detergents. The package
will be marked “HE” or “High Efciency.” Low-water washing
creates excessive sudsing with a regular non-HE detergent.
Using regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer’s instructions to determine the amount
of detergent to use.
NOTE: If using an Oxi laundry boost product, add to the
detergent dispenser.
HELPFUL TIP: See “Washer Maintenance” for information on
recommended method of cleaning washer dispensers.
Pour a measured amount of liquid
fabric softener into dispenser; always
follow manufacturer’s directions for correct amount of
fabric softener based on your load size. Then select
Fabric Softener option.
IMPORTANT: Fabric Softener option must be selected
to ensure proper distribution at correct time in cycle.
Do not overll or dilute. Overlling dispenser will cause
fabric softener to immediately dispense into washer.
If Extra Rinse option is selected, fabric softener will be
dispensed in the last rinse.
NOTE: Do not use liquid fabric softener dispenser balls
in this washer. They will not dispense correctly.
5. Add liquid chlorine bleach
to dispenser
7. Press POWER to turn on washer
4. Add HE detergent to dispenser
6. Add liquid fabric softener
to dispenser
Detergent dispenser
Fabric softener dispenser
Do not overll, dilute, or use more than 3/4 cup (180 mL).
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
Liquid chlorine
bleach dispenser
NOTE: Do not add single-dose laundry packets, color-safe
bleach, Oxi-type boosters, or fabric softener crystals to
dispensers. They will not dispense correctly.