Filter
Top Products
l
Rinse Water:
Adjust faucets for tempera-
ture prior to fill for rinse.
NOTE:
Always use cold rinse water for
permanent press fabrics.
To disconnect washer:
l Unplug the electrical power cord and put it
back in its storage area.
l Turn the water faucet off.
l Press the red water flow button to release
the water pressure.
l Move the locking collar down and pull the
hose connector down to disengage from
the faucet adapter.
l Drain water from the hoses through the
hose connector.
Hose connector
l Hang the hoses on the storage rack.
Portable two-faucet connections
IMPORTANT:
Service Kit #3430190 must
be purchased when using portable model
on two-faucet connection.
NOTE: Make sure the Ild Is closed before
moving the washer.
If you have two separate water connections,
your washer can be connected to both the
hot and cold water faucets. For more
information about a service kit, contact
your authorized dealer.
6