Filter
Top Products
Operating Your Dryer
In This Section
Paw
Page
Botoro l
brting your &yr
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
End of cyck signal
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Starling or stopping your byor . . . . . . . . . . . . . . . . . . . . . . . 5
Selecting a cycle
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..s....
6
Operating your dryer properly assures the best drying results. This section gives you important
information to help you to select a cycle, time, and temperature.
Before starting your dryer
Refer to the information below, and ‘Laundry
Tips” on page 11 for control setting, sorting,
and loading information.
NOTE: Remove any hang tags or temporary
labels before using your dryer. Wipe dryer
drum with a damp cloth to remove dust from
storing and shipping.
Starting or stopping your dryer
Starting your dryer
Close the door and select
a
cycle. Push the Start
Button. See pages 6-6 for additional setting
information. Your dryer automatically stops when
a cycle ends.
Stopping and restarting your
dryer
Open the dryer door or turn the Cycle Control
Knob to OFF. Close the door; make new selec-
tion (if necessary). Push the Start Button.
NOTE: The Cycle Control Knob should point to
an OFF area when the dryer is not in use. If the
dryer is stopped before the cycle is finished, turn
the Cycle Control Knob to an OFF area.
\
c ‘&-
@Q
\
/
End of cycle signal
The dryer sounds a signal to let you know when
the cycle is finished. The signal is not adjustable
and cannot be turned off.
The signal is helpful when you are drying
permanent press, synthetics, and other items
that should be taken out as soon as the
dryer stops.
5