Filter
Top Products
Stopping/restarting your
If necessary, you can stop your washer
during a cycle to add more clothes.
l To stop the washer at any time, push in
the Cycle Control Knob.
l To restart the washer, close the lid (if
necessary) and pull out the Cycle
Control Knob.
washer
Selecting a cycle and time
Your washer’s Cycle Control Knob is shown
below. Use the information in this section to
help you make the best cycle selections for
your wash loads. Each cycle is designed for
different types of fabrics and soil levels.
l The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
l An Extra Rinse option is available in all
cycles except the Regular cycle.
l Refer to page 9 to help you understand
what happens during a wash cycle.
Super Wash cycle
The Super Wash cycle automatically
prewashes the load and advances into the
Heavy cycle. (The washer does not have to
be reset after the Super Wash cycle.) Use
this 15minute cycle when washing heavily
soiled loads that need maximum soil re-
moval.
NOTE: For proper cleaning, use double the
amount of detergent recommended for the
load size.
Heavy cycle
The Heavy cycle features high agitation and
spin speeds, and a longer final spin to
shorten drying time.
l Use 12 minutes of wash time to clean
large loads of sturdily constructed fabrics
that are moderately to heavily soiled.
l Use QUICK WASH, 6 minutes of wash
time, to clean sturdily constructed fabrics
that are lightly soiled.
Regular cycle
The Regular cycle features high spin speeds
to shorten drying time. All rinses are cold in
this cycle.
l Use NORMAL, 9 minutes of wash time, to
clean cotton and linen fabrics that are
moderately to heavily soiled.
l Use SOFT WASH, 6 minutes of wash time,
to clean cotton and linen fabrics that are
lightly soiled.