Filter
Top Products
Soak Cycle
The Soak cycle features brief periods of agita-
tion and soak time to help remove heavy soils
and stains that need pretreatment.
l Use warm water when soaking laundry.
Hot water can set stains. See pages 16 to
18 for stain removal information.
l Use the amount of detergent or presoak
additive recommended by the manufacturer.
l After the Soak cycle ends, add detergent
and set a new wash cycle.
NOTE: The 4-minute Pre-Wash time on
7-cycle models features high-speed agita-
tion to help remove heavy soils and stains
that need pretreatment. Once the Pre-Wash
period ends, add detergent and start a new
wash cycle.
7-Cycle Model
Using rinse and spin
When using extra detergent for heavily soiled
clothes, or washing special-care items, you
may find an extra rinse and spin is needed.
1. To add an additional rinse, push in the
Cycle Control Knob and turn clockwise to
RINSE, as illustrated.
2. Pull out the Cycle Control Knob. The
washer fills to selected load size,
agitates, drains, and spins.
Using drain and spin
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Push in the Cycle Control Knob and turn
clockwise to SPIN, as illustrated.
2. Pull out the Cycle Control Knob. The
washer drains, then spins.
8