Filter
Top Products
Using your Washer
Start your washer after you put in
detergent, the load, and any other
laundry aids according to Information
on page 3 and page 6.
1.
Set the LOAD SIZE SELECTOR.
l
Select the water level that matches
the size of the load. See page 5 for
more information
IMPORTANT For the best cleaning
results with the least wrinkling. make
sure the load has enough water for
Items to move freely
2. Set the TEMPERATURE SELECTOR.
l
Match the wash water temperature to
the type of fabrics and ~011s being
washed All rinses are cold
3. Select a Cycle and Start the
Washer.
l
Push the Cycle Control Knob in and
turn it to the right (clockwise)
l
Stop when the pointer is on the
numb
ber
of mrwtes
of washing you want
in the cycle you want.
l
lnstructrons for which cycles to use for
each fabric type are under the Ird.
l
To start the washer, pull the Cycle
Control Knob out. When the cycle IS
over, the washer will stop.
l
To stop the washer at any time
during a cycle, push the Control
Knob in.
Pull it out to restart the washer.
l
To change a setting,
push the Con-
trol Knob in to stop the washer. Then turn
the Control Knob to the right (clockwise)
to the setttng you want Pull the knob
out to start the washer.
l
Pages 8 -11 show what happens in
each cycle.
4