Filter
Top Products
Using rinse and spin
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may want an extra rinse and spin.
1. Push in Cycle Control Knob and turn
clockwiie until indicator points to RINSE,
as illustrated.
2. Pull out Cycle Control Knob. The washer
fills to selected load size, agitates, drains,
and spins.
Using drain and spin
A drain
and
spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1.
Push in Cycle Control Knob and turn
clockwise until indicator points to SPIN,
as illustrated.
2. Pull out Cycle Control Knob. The washer
drains
and
then spins.
What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to
the selected load size) before agitation and
timing start. The washer begins agitating
immediately after filling; agitation can occur
with the washer lid up or down.
After agitation starts, the Cycle Control Knob
turns clockwise until it points to an OFF area
and the cycle ends.
The washer pauses briefly during the
Permanent Press cycle. These
pauses are
normal for washer operation.
WASH
RiNSE
Lzkl
Wash selected time Rinse
‘The Permanent Press cyde patthlly
drains, fills,
agitates
briefly, and drains.
IBY
Spin
Drain-No agitation
Spin
7