Filter
Top Products
11
The display will show the default settings for the selected
cycle. If desired, press the button beneath each setting to
adjust the Temperature, Soil Level, and Spin Speed, and to add
options such as an additional Rinse. Use the and arrow
keys to page to additional options.
For more information on a cycle, press MORE INFO.
NOTE: Not all settings are available on all cycles. See “Cycle
Guide” for available settings.
9. Adjust settings, if desired
10. Select any additional options
Press the FanFresh
™
button or EcoBoost button to add these
options to the selected cycle.
If the FanFresh option is selected, the washer will automatically
activate the vent fan and tumble the load periodically for up to
16 hours. This is useful if you are unable to remove a load im-
mediately after the cycle has nished.
The EcoBoost
™
option provides additional energy savings
through reduced hot water usage and maintains cleaning
performance by lengthening the wash time on some cycles.
NOTE: Not all options are available with all cycles.
59min
Estimated
Cycle Time
OK
Normal/Casual
Use the arrows to increase or decrease the delay start time
O
20 hours
Delay Start: 6 hours
59min
Estimated
Cycle Time
11. Setting a delayed start
If you do not want to begin a cycle immediately, you may
choose the DELAY START option. This will delay the start
of the wash cycle by up to 20 hours.
To set a delayed Start:
1. Select the Delay Start option using the LCD control buttons.
Use the buttons to adjust the delay time up or down.
2. Press START/PAUSE to set the delay. The delay countdown
has started when the START/PAUSE light stops blinking.
IMPORTANT: If you are using the Delay Wash option, use of the
dispenser cartridge is recommended, or powdered detergent
may be used in the HE powdered detergent compartment.
12. Press and hold START/PAUSE
to begin wash cycle
Press and hold the START/PAUSE button to start the wash
cycle. To pause a cycle in progress, press the START/PAUSE
button once, then press and hold again to continue the cycle.
To cancel a cycle, press the POWER button.
Once you press and hold START/PAUSE, you will hear the
door lock, unlock, and lock again. The washer door will remain
locked during the wash cycle.
Unlocking the door to add garments:
If you need to open the door to add 1 or 2 missed garments,
you may do so while “Door Locked - To unlock and add a
garment, press START/Pause button” is displayed.
Press START/PAUSE once; the door will unlock
once the washer movement has stopped.
This may take several minutes. Then close
door and press START/PAUSE again to restart
the cycle.