Filter
Top Products
8
10. Select Delay Wash, if desired (on some models). See “Delay
Wash” in the “Modiers” section.
11. Press START. The wash cycle begins, and the display shows
the estimated remaining time. The lid will lock.
NOTE: If you do not press Start within 5 minutes of pressing
Power, the washer automatically shuts off.
Cycles
Turn the knob to choose the right wash cycle for the type of
fabrics you are washing. When the knob points to a cycle, the
indicator light for the cycle will glow and the indicator light for
Start will blink. If the default settings for the Modiers and Options
are acceptable, you may press Start to begin the wash cycle.
Preset Cycle Settings
For ease of use, preset cycle settings provide the recommended
fabric care settings for each cycle.
To use the preset cycle settings:
1. Press POWER.
2. Select the cycle you want by turning the knob. The preset
cycle settings will be displayed (see the following chart).
NOTE: The preset cycle times may vary slightly depending on
your model.
3. Press START. The wash cycle will begin.
Preset Cycle Settings
Cycle Preset
Minutes*
Soil
Level**
Wash/
Rinse Temp
Whitest Whites 79 Heavy Hot/Cold
Heavy Duty 63 Heavy Hot/Cold
Bulky Items/
Co
mforters
52 Normal Warm/Cold
Sheets 49 Normal Warm/Cold
Normal 41 Normal Warm/Cold
Casual/Perm Press 44 Medium Warm/Cold
Colors/Towels 45 NormalCold/Cold
Quick Wash 33 LightWarm/Warm
Wool 35 LightWarm/Cold
Delicate/Handwash 36 LightCold/Cold
Soak 41 Medium Warm/Cold
Rinse & Spin 24 Not
applicable
Cold/Cold
Drain & Spin 14 Not
applicable
Not
applicable
Clean Washer 60 Not
applicable
Not
applicable
*These times are for reference only and may not match your
model exactly.
**Cycle time in minutes will appear in
the display while you are
making selections. The total cycle time will appear, including an
estimated time for drain and ll times, once Start is pressed.
NOTE: Load only to the top of the basket. Overloading can cause
poor cleaning. See “Starting Your Washer.”
Whitest Whites
This cycle introduces liquid chlorine bleach to the load at the
proper time for improved whitening of your heavily soiled white
fabrics. Cycle combines high-speed wash action and high-speed
spin speed. For maximum soil and stain removal, liquid chlorine
bleach must be used.
Heavy Duty
Use this cycle for heavily soiled or sturdy items. Cycle combines
high-speed wash action and high-speed spin. Deep Clean and
Spray Rinse are the default options for this cycle, but they can be
turned off. See “Changing Cycles, Modiers, and Options.”
Bulky Items/Comforters
Use this cycle to wash large items such as comforters, pillows,
and sleeping bags. This cycle starts with a soak to thoroughly
saturate your large load. This is followed by medium wash action
and medium spin speeds to maintain load balance.
Sheets
Use this cycle for sheets, pillowcases, and blankets. The wash
action of this cycle is designed to keep large items from tangling
and balling up.
IMPORTANT: For best performance, dr
op items in loose heaps
evenly around the basket wall. Do not load items directly on the
impeller for this cycle.
Normal
Use this cycle for normally soiled cottons and mixed fabric loads.
Cycle combines high-speed wash action and high-speed spin.
Spray Rinse is the default option for this cycle, but it may be
turned off.
Casual/Perm Press
Use this cycle to wash loads of no-iron fabrics such as sport
shirts, blouses, casual business clothes, permanent press, and
blends. This cycle uses medium-speed wash action, a low-speed
spin, and a cool down process to reduce wrinkling.
Colors/Towels
Use this cycle for lightly soiled, colored clothing, or towels. This
cycle uses low to medium-speed wash action and high-speed
spin. For best results, use cold or warm water.
Cycle Preset
Minutes*
Soil
Level**
Wash/
Rinse Temp