Filter
Top Products
5
Straight power cord
1. Remove power plug and yellow strap from machine base to
release the rear leveling system.
2. Firmly grasp the power cord and pull to completely remove
the power cord, cord restraint, and pin from the rear panel.
3. Confirm that the power cord restraint (A), and pin (B) are
removed.
4. To remove the power cord from the cord restraint, push the
power cord in, press TAB, and then pull the power cord out.
Looped power cord
1. Firmly grasp the yellow shipping strap and pull until both ends
are completely removed from washer.
2. Check that two (2) shipping pins were removed with the
shipping strap.
Straight power cord
A.Power cord restraint B. Pin
A
B
Looped power cord