Whirlpool W10113000A Washer User Manual


 
14
Status Lights
These lights show which portion of the cycle the washer is
operating. They also indicate when you can add other garments
to the wash load.
Load is Done
The Done light stays on until the lid is opened or the Power or
Pause/Cancel button is pressed.
Indicator lights
An indicator light shows which Cycle, Modifiers and Options you
have selected.
Estimated Time Remaining
When a wash cycle is started, the estimated time remaining for
the cycle, including fills and drains, will be displayed. The time
will count down to the end of the cycle.
Cycles
Turn the knob to choose the right wash cycle for the type of
fabrics you are washing. When the knob points to a cycle, the
indicator light for the cycle will glow and the indicator light for
Start will blink. If the default settings for the Modifiers and
Options are acceptable, you may press Start to begin the wash
cycle.
Preset Cycle Settings
For ease of use, preset cycle settings provide the recommended
fabric care settings for each cycle.
To use the preset cycle settings:
1. Press POWER.
2. Select the cycle you want by turning the knob. The preset
cycle settings will be displayed (see following chart).
NOTE: The preset times may vary slightly depending on your
model.
3. Press START. The wash cycle will begin.
Preset Cycle Settings
*These times are for reference only and may not match your
model exactly.
**Cycle time in minutes will appear in the display while you are
making selections. The total cycle time will appear, including
an estimated time for drain and fill times, once Start is pressed.
NOTE: Load only to the top of the basket. Overloading can cause
poor cleaning. See “Starting Your Washer.”
Whitest Whites
This cycle introduces liquid chlorine bleach to the load at the
proper time for improved whitening of your heavily soiled white
fabrics. Cycle combines high-speed wash action and high-speed
spin speed. For maximum soil and stain removal, liquid chlorine
bleach must be used.
Heavy Duty
Use this cycle for heavily soiled or sturdy items. Cycle combines
high-speed wash action and high-speed spin. Deep Clean is the
default option for this cycle, but it can be turned off. See
“Changing Cycles, Modifiers and Options.”
Bulky Items
Use this cycle to wash large items such as comforters, sleeping
bags and blankets. This cycle starts with a soak to thoroughly
saturate your large load. This is followed by medium wash action
and medium spin speeds to maintain load balance.
Sheets/Towels
Use this cycle for sheets, pillowcases and towels. The wash
action of this cycle is designed to keep large items from tangling
and balling up.
IMPORTANT: For best performance, drop items in loose heaps
evenly around the basket wall. Do not load items directly on the
impeller for this cycle.
Cycle Preset
Minutes*
Soil
Level**
Wash/Rinse
Tem p
Whitest Whites 85 Heavy Hot/Cold
Heavy Duty 73 Heavy Hot/Cold
Bulky Items 53 Normal Warm/Cold
Sheets/Towels 50 Normal Warm/Cold
Normal 50 Normal Warm/Cold
Casual/Perm Press 46 Medium Warm/Cold
Colors/Darks 49 Normal Cold/Cold
Quick Wash 41 Light Warm/Warm
Wool 36 Light Warm/Cold
Delicate/Handwash 37 Light Cold/Cold
Soak 41 Medium Warm/Cold
Rinse & Spin 24 Not
applicable
Cold/Cold
Drain & Spin 14 Not
applicable
Not
applicable
Clean Washer 60 Not
applicable
Not
applicable