Filter
Top Products
6
OPERATING YOUR WASHER
4. Turn the Load Size selector to the
setting that corresponds with the size
of your wash load and the type of
fabric being washed.
• The Load Size Selector has three load
size settings: small, medium, and large.
• To change the load size setting after the
washer has started to fill, turn the
Selector to the desired new setting.
5. Select a wash-rinse temperature with
the Water Temperature selector. Match
the water temperatures with the type
of fabric and soils being washed.
• See page 14 for water temperature
guidelines.
• Three wash-rinse temperatures are
available: hot-cold, warm-cold, and
cold-cold.
6. Push in the Cycle Control Knob and
turn it clockwise to the wash cycle
you want.
7. Pull out the Cycle Control Knob to
start the washer.
8. (OPTIONAL STEP) If desired, add
measured liquid fabric softener to the
rinse water. See page 10.
Stopping/restarting your washer
• To stop the washer at any time, push in
the Cycle Control Knob.
• To restart the washer, close the lid (if open)
and pull out the Cycle Control Knob.
Load Size
Small Large
Medium
Temperature
Hot
Cold
Cold
Cold
Wash
Rinse
Warm
Cold