Whirlpool LSV9244DQ0 Washer User Manual


 
SPEEDS RECOMMENDED
AGITATION SPIN
CYCLE
HIZ;H*
LOW Permanent Press
COMMENTS
l
Use for permanent press,
synthetic fabrics
l
Removes heavy soils
l
Minimizes wrinkling
*If you select high-speed agitation, the Gentle Wash System helps protect your fabrics by reducing
wash abitation during the last few minutes of wash agitation in the Normal and Permanent Press
cycles.
8. Turn the End-of-Cycle Signal On or
Off, and Extra Rlnse option On or Off
I
End ol Cycb Stanal
011 - on-
I
with the rotary knob shown.
l
Select Extra
Rinse On when adding
off
extra detergent for the Super Wash
on
cycle, or any other cycle. The washer
adds an additional rinse and spin to the
end of the wash cycle.
l
Select End-of-Cycle Signal On when
you want the washer to alert you when
I
Extra Rinse
I
the wash load is complete.
This is
especially helpful when washing items
that should be removed from the
washer as soon as the cycle ends.
9. Push In the Cycle Control Knob and
turn lt clockwlse to the wash cycle
you want. See pages 8 and 9.
10. Pull out the Cycle Control Knob to
start the washer.
Stopping/restarting your washer
l
To stop the washer at any time, push in
Cycle Control Knob.
l
To restart the washer, close lid (if neces-
sary) and pull out Cycle Control Knob.
7