Filter
Top Products
13
USING THE LIQUID FABRIC SOFTENER DISPENSER
1. Add detergent and load clothes into the basket.
2. Pour liquid fabric softener into the dispenser using
the amount recommended on the package. Avoid
dripping or spilling any fabric softener on the load.
3. Dilute fabric softener with warm water.
Fill dispenser with warm water until liquid reaches
the cross bar in the opening.
4. Start the washer. Diluted fabric softener will be
added to the load during the final rinse.
NOTE: Do not stop the washer before the rinse part
of the cycle begins. Staining can occur.
Cleaning the liquid fabric softener dispenser
Flush dispenser periodically with warm water, as
illustrated.
•
To remove the dispenser, grasp the top of the
dispenser with both hands. Squeeze and push
upward with thumbs to remove.
•
Clean dispenser by holding under water faucet.
Replace after cleaning.
NOTE: Do not wash clothes with this dispenser
removed. Do not add detergent or bleach to
dispenser. The dispenser is for liquid fabric
softener use only.
USING YOUR WASHER
•
Too much fabric softener can make some items
(diapers and towels) nonabsorbent. If this
happens, use less fabric softener or do not use it
every time.
•
Always dilute fabric softener with
1
⁄2 to 1 cup (125
to 250 mL) warm water. Undiluted fabric
softener can stain fabrics.
•
Add diluted fabric softener only in the final rinse.
•
Fabric softener should not be mixed with other
laundry products because greasy stains may
form. If stains form, remove them by wetting the
stain and rubbing with liquid detergent or a bar
of soap. Rewash the stained item.
ADDING LIQUID FABRIC SOFTENER (on models with no dispenser)