Filter
Top Products
Selecting a wash temperature
Your washer selects a wash water temperature
and time when you select a wash cycle (see
“Selecting a cycle and time” on page 7).
Match the wash water temperature to the type
of fabric and soils being washed. All rinses are
cold.
For hot waeh water, turn the Cyde Control Knob
to Heavy, 14 minutes wash time.
For warm wash water, turn the Cycle Control
Knob to Regular, 10 minutes wash time: or Short,
6 minutes wash time.
For cold wash water, turn the Cycle Control
Knob to Normal, 6 minutes wash time; or Short, 2
minutes wash time.
You may select diierent wash times by first
selecting the water temperature and then turning
to the new wash time. For example, if you desire
14 minutes wash time with cold water:
1. Push in the Cycle Control Knob and turn it
clockwise to Normal-6 (cold wash water).
2. Pull out the Cycle Control Knob and allow your
washer to fill.
3. When your washer has filled, push in and turn
the Cycle Control Knob clockwise to Heavy-14.
(Your washer may add a small amount of
additional warm water, but this should not
affect the overall desired wash water tempera-
ture.)
4. Pull out the Cycle Control Knob.
Water temperature tips
- Use warm or hot wash water with permanent
press fabrics.
- For heavily soiled permanent press or knit
clothes, pre-wash or pre-soak in warm water
before washing.
See the ‘Water usage guide’ on page 14 for
more information.
Wuh watm tmpyture
6