Filter
Top Products
ITEMS
DRYING INSTRUCTIONS
Flame-retardant
Some items have been treated with a flame-retardant finish to improve
finishes
their resistance to burning. Such items are clearly labeled. To retain
flame-retardant qualities through continuous use and washing, clean
and dry according to the manufacturer’s instructions.
Napped items
Dry separately or with similar colors to avoid lint transfer. Follow care
label instructions.
l
Corduroy,
1.
Remove from dryer while there is still a trace of moisture.
velveteen
2. Smooth, reshape, and air dry before putting away.
Quilted,
Follow care label instructions.
down-filled
items
1.
Dry one at a time.
2. Remove from dryer and shake or fluff the item during the drying cycle
3. Smooth and reshape before putting away.
Snowsuits,
jackets
. Nylon or
polyester
Check label for fiber content, then follow care label instructions.
1.
Dry garment for about 10 minutes. Remove and turn inside out.
Dry for 10 more minutes.
2. Remove from dryer immediately and hang on a non-rusting hanger
to finish drying. This will help eliminate wrinkles.
Tinted, dyed, or
Dry according to fabric, weight, and care label instructions. Wipe the
noncolorfast
dryer drum carefully to remove any dye or lint that can be transferred to
items
other loads. See “Cleaning the dryer interior” on page 11.
Washable knits
Do not overdty knits. Overdrying can cause shrinking and static cling.
1.
Select cycle according to fabric and construction.
2. Turn synthetics and blends inside out when drying to avoid pilling.
3. Remove cotton and rayon knits while still slightly damp. Stretch into
shape and lay flat to finish drying.
16