Filter
Top Products
Using dryer fabric softeners
dryer fabric softeners are recommended for
l
Remove fabric softener stains by wetting
-educing static cling and for softening
the stains and rubbing them with liquid
‘abrics. Always follow package instructions
detergent or bar soap and rewash.
zarefully.
l
Some fabric softeners can clog the lint
) Put one fabric softener sheet on top of the
screen and slow drying. Use fabric soften-
load
before starting the dryer.
ers labeled as dryer safe.
Do not add a fabric softener
sheet
after
the drying cycle has
started. Instant heat can cause
the fabric softener to spot fabrics.
Saving energy
l
Use an Automatic cycle to dry most loads.
l
Shorten drying times by exhausting dryer
l
Dry only full loads without overdrying.
properly and cleaning exhaust duct and
l
Avoid overloading dryer, adding wet items
outside exhaust hood as needed.
to a partly dried load, or opening the door
- Keep the lint screen
clean.
unnecessarily.
- Use your dryer in
a
room where room air
l
Plan your laundry to dry one load after
temperature is above 45°F (7°C).
another. A warm dryer shortens drying time. - Sort loads by fabric weight and type.
Vacation care
1.
Unplug power supply cord or turn off
electrical power supply.
2. Clean lint screen.
Voltage requirements
l
Model REC3622D operates on 240 or 208
volt household current.
l
Models REP3822D and RGC3622D
operate on 120 volt household current.
NOTE:
Electric dryers using 208 or 120 volts
require longer drying times than dryers using
240
volts.
240 or 206 volt
power supply
14