Filter
Top Products
Manual clean lint filter
Clean lint filter after every load.
1. To remove, grasp the top of the agitator
with both hands. Pull upward to remove
agitator cap. Lint filter is attached to the end
of the shaft.
2. Detach lint filter by pinching forked ends of
shaft together. Slide lint filter off shaft.
3. Wash or wipe the lint filter clean.
4. Slide filter back into place on shaft (open
end up). Snap into place.
5. Push lint filter and agitator cap firmly back
into agitator.
Fabric
softener
Lint filter
/
10