Whirlpool RABZl32D Washer/Dryer User Manual


 
When using extre detergent for heavily
soiled clothes, or washing special-care
items, you may want an extra rinse and spin.
Push in Cycle Control Knob and turn
clockwii until indicator points to RINSE,
1.
2.
as illustrated.
Pull out Cycle Control Knob. The washer
fills to selected toad size, agitates, drains,
and spins.
Using rinse and spin
Using drain and spin
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Push in Cycle Controt Knob and turn
clockwise until indicator points to SPIN,
as illustrated.
2. Pull out Cycle Control Knob. The washer
drains and then spins.
What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to
the selected load size) before agitation and
timing start. The washer begins agitating
immediately after filling; agitation can occur
with the washer lid up or down.
WASH
Fill
Wash selected time
After agitation starts, the Cycle Control Knob
turns cktckwiie until it points to an OFF area
and the cycle ends.
RINSE
Rinse
w
=w
Drain- No agitation
t4
-w-
Drain-No agitation
Spin
Spin